david5757

You mean before i changed clutch plates? Yes it did Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

No i turned it back to see if that would work Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Decided to give it another go, in the situation with these photos the bike wont start at all. When i put the adjuster all the way to the end (Bottom adjuster) it wil start but when putting it in first Gear it Will already start to roll forward. I also noticed that my cable is a little bit frayed near the handlebar, anyone know how to go from here? I think moving the Bottom adjuster more Will help but it is already at his maximum point.

Yes Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Yep......did you soak the plates in oil overnight before fitting them? In did soak Them yeah for about 15 hours. Is also put the friction plates and steel plates alternating Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

I think its the clutch pack itself then, thanks Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

About the same when it did worked, although it gets alot more stiff when almost pulled in al the way Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

After changing my clutch plates, my lever was pretty loose, after adjusting it it would start and then stall. I tried to re adjust my slack al the way to the back at the bottom adjuster, it starts now but when putting it in 1st it would roll forward, what am i doing wrong?

The manual for my r125 says it should be within 30-40mm which it is Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk I measured it again and it is indeed too much Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

The manual for my r125 says it should be within 30-40mm which it is Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk thats the gear changer i will get a video later tonight of mine, with the same levers I got mine working Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Tried the tips and it worked guys! Thanks alot all! Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Will take a pic tommorrow! Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk thank you :D my bikes in bits again sad times Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Do you mean turning the adjuster al the way down? Then adjusting the slack near the shifter? You need to adjust everything so that when you pull the clutch lever, the cable is pulled as far as possible. So, turn the dial on the new lever so that the lever is furthest away from the handle bar, then turn the cable adjusters counterclockwise so there is very little slack in the cable. Alright will try that, thanks in advance! Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk

Will take a pic tommorrow! Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk