rockerpaul

So update gone back through the carbs clean everything replaces jets , pilots, seals , starts runs , ticks over fine pulls away just , went for a 50 mile run and it fly's along till i roll off the trottle and then roll it back on the revs die it splutters and struggling to get going till i get up to about 3000 rpm then it off ,,,i am sure the carbs are clean now ,, only seem to do it under load , ounces its moving its ok ?? anything more it could be ? run out of ideas now

lol i have been riding over 40 years

Yeah, good question, why change them ? They don't wear out . Only emulsion tubes , needles and slides wear out . What exactly do you mean by won't pull away ? Do you mean it doesn't accelerate how you would like it to or does it just falter and stall under load . Yes it falters and stalls have to slip clutch and rev it to keep it going above 3000 rpm it flys

fuel has been replace , plugs are new, i have fitted a ivans jet kit , clean out carbs etc ,this was happening before i change jets and clean carb but the problem is still there !!

i have a ZX9r which had been standing for 2 years , well i have it up and running now starts ticks over fine , but when i try to ride it ,wont pull away ,so strip the carb down changed all the jets and pilots clean all carbs etc , put all back together same things run fine above 3000rpm , starts ,runs fine ,go well , but just struggling to pull away ?? anyone have any ideas wont wrong ?

https://www.facebook.com/events/211643233021272/ [/img] Road Trip North Wales Motorcycle trip around mountain and valleys on some of the best roads around north wales Road Trip North Wales 18th 19th 20th Sept £35 for 3 nights just need a sleeping bag Let me know if yer interested asap please all welcome