Stolen Moped hotwire repair advice

Hi, my Lexmoto Tornado 125 was recently stolen and completely wrecked. I have ordered a new ignition barrel because they bent the steering lock which interferred with the steering and as they also hotwired it, i was unable to turn it off once it started. My question is how do i rewire it? The new ignition is intact but the wires already on the bike have not got the box because they must have cut it off to hotwire it. What is also frustrating me is that the colours of the wires don't match up. The wires already on the bike are black and white, black, green, red. The wires on the new ignition are red and white, red, black, green.

Thanks guys!

Louise x

might be easier to put in a new wiring loom,

https://www.chinesemotorcyclepartsonline.co.uk/partno_WRLM095

Hi, my Lexmoto Tornado 125 was recently stolen and completely wrecked. I have ordered a new ignition barrel because they bent the steering lock which interferred with the steering and as they also hotwired it, i was unable to turn it off once it started. My question is how do i rewire it? The new ignition is intact but the wires already on the bike have not got the box because they must have cut it off to hotwire it. What is also frustrating me is that the colours of the wires don't match up. The wires already on the bike are black and white, black, green, red. The wires on the new ignition are red and white, red, black, green.

Thanks guys!

Louise x

[Disclaimer; I'm no electrician] If this was a quiz, I would plump for the (black/white) on the bike joining up to the (red/white) on the new ignition. The other wires seem straight forward enough. Get this confirmed before you do anything. I may easily be wrong.

Thank you, that’s what I guessed at but I don’t think it worked. Will get someone else to look at it. Thanks x

short term fix is just stall the bike to shut it off