Jump to content

Main Jet Help (50cc)


CluelessBikerRoss
 Share

Recommended Posts

I have a 50cc moped however it needs a bigger main jet but I cannot find out any information on it. The bike is a WK Wasp 50 TTR and specification link is as follows: https://www.bikez.com/motorcycles/wk_wasp_50_ttr_2017.php Does anyone know what main jet I should be looking for or where to go to find one??

Link to comment
Share on other sites

No that is not what I am trying to achieve. When I got the bike it was already de-restricted and only had an electronic restrictor which is not necessarily good for the bike as it runs too rich and floods. The bike was restricted by a single wire going to the CDI which I clipped. However the bike is running far to lean now and I have already adjusted the fuel mix as much as I can. I melted a spark plug a few weeks back as well due to lean running.

Link to comment
Share on other sites

No that is not what I am trying to achieve. When I got the bike it was already de-restricted and only had an electronic restrictor which is not necessarily good for the bike as it runs too rich and floods. The bike was restricted by a single wire going to the CDI which I clipped. However the bike is running far to lean now and I have already adjusted the fuel mix as much as I can. I melted a spark plug a few weeks back as well due to lean running.

 

Right, got you.From what I can see most Chinese scooters use a 5mm jet . That's going to be the size of the screw thread not the jet ! As far as size is concerned you'll have to get the existing one out and have a look what's stamped on it . Tip. If you don't have a magnifying glass you can use a phone camera held steady and then enlarge the image. After that just go on eBay and get a few bigger sizes to see which works best. These things are pretty generic so as long as it fits and is the same depth it should be ok.Here you gohttp://i.imgur.com/TOHJqbb.png

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Welcome to The Motorbike Forum.

    Sign in or register an account to join in.

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Please Sign In or Sign Up