Recondisoned startng motor HELP NEEDED

Any questions and problems about your motorbike? Ask other members for help and advice.
Message
Author
fastbob
Posts: 3529
Joined: Sat Sep 03, 2016 1:42 pm
Gender: Male
Bike(s): gsxr1100 wp and er5
Location: Coventry
Has Liked: 1895 times
Been Liked: 1417 times

Re: Recondisoned startng motor HELP NEEDED

#61 Post by fastbob » Fri Jan 11, 2019 8:46 am

Fleck wrote:
Fri Jan 11, 2019 7:19 am
fastbob wrote:
Fri Jan 11, 2019 12:11 am
Fleck wrote:
Thu Jan 10, 2019 10:32 pm
From what I've read you still haven't tested the solenoid windings? Or have I missed it :shock:
I believe the motor has been tested directly off the battery and still didn't spin.
There's power at the solenoid when button pressed but no click. So it's either open circuit, no ground connection or stuck. That's where I'd start, at the beginning, the motor not running is the next fault.
I completely agree but it's a bit late for that now that the motor has been partially stripped and still doesn't work .

fastbob
Posts: 3529
Joined: Sat Sep 03, 2016 1:42 pm
Gender: Male
Bike(s): gsxr1100 wp and er5
Location: Coventry
Has Liked: 1895 times
Been Liked: 1417 times

Re: Recondisoned startng motor HELP NEEDED

#62 Post by fastbob » Fri Jan 11, 2019 8:49 am

Have you actually removed the starter motor from the bike ?

BIKERDAD
Posts: 359
Joined: Mon Jun 18, 2018 9:00 pm
Gender: Male
Bike(s): Honda 4004..GSX250..GPZ500..CB750 .
Location: Caerphilly
Has Liked: 272 times
Been Liked: 113 times

Re: Recondisoned startng motor HELP NEEDED

#63 Post by BIKERDAD » Fri Jan 11, 2019 11:15 pm

fastbob wrote:
Fri Jan 11, 2019 8:49 am
Have you actually removed the starter motor from the bike ?

Yes around 20 times lol one the last times was to do the photos ......I'll be at the bike again sat .I'll post any news good or bad .later on afternoon . Cheers

fastbob
Posts: 3529
Joined: Sat Sep 03, 2016 1:42 pm
Gender: Male
Bike(s): gsxr1100 wp and er5
Location: Coventry
Has Liked: 1895 times
Been Liked: 1417 times

Re: Recondisoned startng motor HELP NEEDED

#64 Post by fastbob » Sat Jan 12, 2019 12:17 am

BIKERDAD wrote:
Fri Jan 11, 2019 11:15 pm
fastbob wrote:
Fri Jan 11, 2019 8:49 am
Have you actually removed the starter motor from the bike ?

Yes around 20 times lol one the last times was to do the photos ......I'll be at the bike again sat .I'll post any news good or bad .later on afternoon . Cheers
Sorry, hoped you had , its just that in your original post you seem to have still got it on the bike . Let's hope you can nail this thing tomorrow.

BIKERDAD
Posts: 359
Joined: Mon Jun 18, 2018 9:00 pm
Gender: Male
Bike(s): Honda 4004..GSX250..GPZ500..CB750 .
Location: Caerphilly
Has Liked: 272 times
Been Liked: 113 times

Re: Recondisoned startng motor HELP NEEDED

#65 Post by BIKERDAD » Sat Jan 12, 2019 1:12 am

I did m8 .. if done a new.post so I'll just be saying thank you to all you guys for your help.. also . If any you guys out her need help ask on here and when you by tools dont by the cheapest tools . Iv never been a guy who buys tool because some famous person name or high priced stuff .As iv found some cheap tools just Do the job .As I bought a cheap muilt meter back.last year £10 at most cant quite remember but because i had a crap meter it was showing power when there was no power so pay a few quid as I'm sure it be worth it..

So my bike starter NOW TURNS OVER so later.i will be starting it up and going .for a well deserved ride .

I changed the start solenoid put it on the bike pulled the battery back on and pushed the starter.button and the starter turned over didn't start the bike up as its a bit late..

So why did the starter not turn over when I put the jump.leads on to it ???????? .. As if the starter had turned over last week I would have changed the solenoid..

Well it's working thanks guys ..

Muttly
Posts: 395
Joined: Wed Jul 18, 2018 7:32 pm
Gender: Male
Bike(s): Lexmoto Falcon 125 for now and a 1972 CD175 projec
Location: Birmingham
Has Liked: 72 times
Been Liked: 168 times

Re: Recondisoned startng motor HELP NEEDED

#66 Post by Muttly » Sat Jan 12, 2019 7:24 am

Really pleased for you. I’ve been reading as you go but not contributing because I have the practical skills of a sea anemone. Really pleased you solved it.

fastbob
Posts: 3529
Joined: Sat Sep 03, 2016 1:42 pm
Gender: Male
Bike(s): gsxr1100 wp and er5
Location: Coventry
Has Liked: 1895 times
Been Liked: 1417 times

Re: Recondisoned startng motor HELP NEEDED

#67 Post by fastbob » Sat Jan 12, 2019 9:48 am

Oh that's brilliant !

User avatar
Six30
Wannabe MOD
Posts: 5147
Joined: Tue Jul 15, 2014 10:48 am
Gender: Male
Bike(s): Triump Speed Triple r
Location: In Rennies wardrobe
Has Liked: 1204 times
Been Liked: 2111 times

Re: Recondisoned startng motor HELP NEEDED

#68 Post by Six30 » Sat Jan 12, 2019 10:24 am

Glad it's sorted, and I was happy to help , I like sharing my mechanical knowledge to help others :thumb:
"People know me. I'm very important. I have many leather-bound books and my apartment smells of rich mahogany."

fastbob
Posts: 3529
Joined: Sat Sep 03, 2016 1:42 pm
Gender: Male
Bike(s): gsxr1100 wp and er5
Location: Coventry
Has Liked: 1895 times
Been Liked: 1417 times

Re: Recondisoned startng motor HELP NEEDED

#69 Post by fastbob » Sat Jan 12, 2019 11:05 am

Six30 wrote:
Sat Jan 12, 2019 10:24 am
Glad it's sorted, and I was happy to help , I like sharing my mechanical knowledge to help others :thumb:
Classic!