fishermanferg Posted April 2, 2017 Share Posted April 2, 2017 ive got a universal tacho that I would like to fit to my xv535 has anybody fitted one there was no wiring instructions it has five wires a long red one a long black one a short green one a short black one a short yellow /black one ,I'm sure the yellow black one is the signal wire that connects to the coil I'm not sure about the other wires any help appreciated Quote Link to comment Share on other sites More sharing options...
TimR Posted April 2, 2017 Share Posted April 2, 2017 No makers name on the tacho or where you bought it from . Some online sellers have the instructions in the advert for the items Quote Link to comment Share on other sites More sharing options...
fishermanferg Posted April 2, 2017 Author Share Posted April 2, 2017 thanks for reply no name on tacho I managed to google the same one ,its Chinese and hopefully ive found how it is wired the long red and black are for the bulb I tried them across a battery and the tach o lit up ,the yellow back is the signal wire that you attatch to the coil negative side the other vtwo are power and ground ,I'm going to have a go tomorrow the coils are not that hard to get to ,ive changed them before , the signal wire on the xv535 is either orange for the rear cylinder or gray for the front ,will let you know how I get on ,you know what Chinese parts can be like Quote Link to comment Share on other sites More sharing options...
fishermanferg Posted April 4, 2017 Author Share Posted April 4, 2017 well ive managed to wire it up and its working reasonably well ,don't know for how long as its Chinese ,but its gave me experience of how to wire one in if I want to buy a better one Quote Link to comment Share on other sites More sharing options...
JRH Posted April 4, 2017 Share Posted April 4, 2017 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.