nicole.vano Posted April 27, 2017 Share Posted April 27, 2017 Having an issue with my sr50, when i switch it off the indicator lights just keep flashing, to stop this i have to remove the 15A fuse then put this back in to start my ped again. Any one have any clues to what it could be? Quote Link to comment Share on other sites More sharing options...
Grumpy Old Git Posted April 27, 2017 Share Posted April 27, 2017 The flasher relay is 'sticking'. Replace it (they are not expensive). Quote Link to comment Share on other sites More sharing options...
Grumpy Old Git Posted April 27, 2017 Share Posted April 27, 2017 The flasher relay is 'sticking'. Replace it (they are not expensive). Sorry - Re-read your post../.. It only happens when you turn the ignition off? If so, then the voltage feed to the flasher relay from the alarm is not 'disappearing' and this will be due to a bad contact within the ignition circuit (ECU / Relay - You will need to check with a multi-meter and have access to a wiring diagram). Quote Link to comment Share on other sites More sharing options...
nicole.vano Posted April 27, 2017 Author Share Posted April 27, 2017 Thanks mate will give that a go Quote Link to comment Share on other sites More sharing options...
nicole.vano Posted May 3, 2017 Author Share Posted May 3, 2017 I have thoroughly checked all of this, still to no avail.When the ignition key is turned to the 'OFF' position, there is still electric running to the bike as the clocks do not go off and I have the indicator issue still.So frustrating, I just do not know where else to look.Any more suggestions would be fantastic! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.