fastbob Posted January 13, 2020 Author Share Posted January 13, 2020 Bump What are we bumping? Free bump Head on brick wall a lot of the time . Just trying to make this thread easier to find . Quote Link to comment Share on other sites More sharing options...
Bender Posted January 13, 2020 Share Posted January 13, 2020 Here it is Quote Link to comment Share on other sites More sharing options...
fastbob Posted February 16, 2020 Author Share Posted February 16, 2020 Bump What are we bumping? Free bump Head on brick wall a lot of the time . Just trying to make this thread easier to find . Bump ( again ) Quote Link to comment Share on other sites More sharing options...
KiwiBob Posted September 11, 2020 Share Posted September 11, 2020 Not quite sure what you mean but anyway, what I do do first is place the cover on the paper and draw round it with a fine biro . Then I take it off and scribble all over the jointing face with a marker pen several times and while its still sticky I put it back onto the paper using the drawn outline as a guide . This should make a print of the inner shape . Then I use a bit plastic tube dipped in paint to mark all the hole positions. Next I punch out all the holes using a sharpened locator dowel . Lastly I carefully cut the whole thing out with a scalpel . If the gasket has all straight edges I skip the printing stage and just use a ruler to draw the inner shape and a bit of the old gasket to draw around the wavy bits where the holes go . I'm sure there are other ways of doing this but I just kind of made this up as I went along. Cheers Bob, I’ll give it a go when I’m ready - the best place to buy decent gasket paper is?I just buy it off eBay , its called Flexoid Hi fastbob, what thickness flexoid did you use for your gaskets? Quote Link to comment Share on other sites More sharing options...
fastbob Posted September 11, 2020 Author Share Posted September 11, 2020 Cheers Bob, I’ll give it a go when I’m ready - the best place to buy decent gasket paper is?I just buy it off eBay , its called Flexoid Hi fastbob, what thickness flexoid did you use for your gaskets? I'm sorry , I don't know . I bought a selection pack and just used the thickness that felt right . Quote Link to comment Share on other sites More sharing options...
KiwiBob Posted September 12, 2020 Share Posted September 12, 2020 I just buy it off eBay , its called Flexoid Hi fastbob, what thickness flexoid did you use for your gaskets? I'm sorry , I don't know . I bought a selection pack and just used the thickness that felt right . No worries! .. Many years ago a guy I worked with used a cornflake box to make his gaskets. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.