Jump to content

AR125 CDI wiring.... Off road project from junk...


Guest rufusw5
 Share

Recommended Posts

Hello People,


I'm looking for a bit of help.. To cut a long story short I'm putting an off roader together out of a collection of parts.. It's mostly a sort of KX125 / KMX125 hybrid. I don't have a CDI unit for it, well not quite.. I have a CDI from an AR125, and from trawling the interweb the alternator looks identical.. So I'm pretty sure it'll work...


Does anyone have a wiring diagram for an AR125, or can you tell me where the wires go? The colour coding is a bit different to the KMX, I know red and white / green and white are the pickup coil wires (Pulse generator). On the KMX CDI, Black and white goes to white and red goes to red for the cap charging coil...


On the AR CDI... I have black, black / white, black / yellow and white.


So at a guess, white to white, black and yellow most likely chassis earth, black to coil and black and white to red....


The KMX has a brown and white wire which runs through a diode apparently, it's for the stand cutoff.. Don't need to worry about that.


I know the timing curve will be different, I'm not worried about that, if it makes a big difference I'll get a KMX CDI for it eventually, at this stage I'd just like to get it to run, to see how well this collection of parts works together...


Cheers :D

Link to comment
Share on other sites

  • 9 months later...
Hello People,


I'm looking for a bit of help.. To cut a long story short I'm putting an off roader together out of a collection of parts.. It's mostly a sort of KX125 / KMX125 hybrid. I don't have a CDI unit for it, well not quite.. I have a CDI from an AR125, and from trawling the interweb the alternator looks identical.. So I'm pretty sure it'll work...


Does anyone have a wiring diagram for an AR125, or can you tell me where the wires go? The colour coding is a bit different to the KMX, I know red and white / green and white are the pickup coil wires (Pulse generator). On the KMX CDI, Black and white goes to white and red goes to red for the cap charging coil...


On the AR CDI... I have black, black / white, black / yellow and white.


So at a guess, white to white, black and yellow most likely chassis earth, black to coil and black and white to red....


The KMX has a brown and white wire which runs through a diode apparently, it's for the stand cutoff.. Don't need to worry about that.


I know the timing curve will be different, I'm not worried about that, if it makes a big difference I'll get a KMX CDI for it eventually, at this stage I'd just like to get it to run, to see how well this collection of parts works together...


Cheers :D

Helloo dude I am a ar freak lol I just got shot of a stolen an recovered Kmx, I think I have a cdi unit and reg/rec possible few other bits :) if any helps :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Welcome to The Motorbike Forum.

    Sign in or register an account to join in.

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Please Sign In or Sign Up