hardleydavidson Posted June 15, 2020 Share Posted June 15, 2020 Hi,I don't seem to have any running lights, I've checked both bulbs and they appear to be ok (no loose or broken filaments) The brake light is working but that's it. The front light has two bulbs, both of which look ok. From memory this bike's lights only worked when the engine was running, which I've tried but nothing. Any idea where I should be looking? or what I should be looking at? Is there some sort of relay for the lights? (I'm not very knowledgeable in such matters) Quote Link to comment Share on other sites More sharing options...
husoi Posted June 15, 2020 Share Posted June 15, 2020 Have you used a multimeter to check continuity on the bulbs?You can also use it to check that you have 12V reaching the bulbs. If not would be a blown fuse Quote Link to comment Share on other sites More sharing options...
TimR Posted June 15, 2020 Share Posted June 15, 2020 (edited) Check your fuses before pulling things apart to test wiringLook in owners manual for fuses and it should list the location of fuse box ,which fuse etccetc Edited June 15, 2020 by TimR Quote Link to comment Share on other sites More sharing options...
dynax Posted June 15, 2020 Share Posted June 15, 2020 As above test the bulbs and fuses, then check wiring and connections for damage/corrosion Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.